New Trunk lid for my PT Convertible

Carnut · May 11, 2018, 11:07:43 PM

Quote from: "kb426"Does he charge extra when you watch? The paper article is neat. I have one from 1978 with an article on my 1st top fuel car. It wasn't as well written as the Wichita article.

I have offered advice on occasion.

Carnut · May 14, 2018, 10:06:18 PM

Still Working the body work

Carnut · May 19, 2018, 05:12:46 PM

Bet you all thought it would be painted by now eh?

Fabbed a link for relocated keylock to work the trunk latch

Finished spot welding interior panel into place and then finished up with JB Weld to seal it all in place.

kb426 · May 19, 2018, 09:18:25 PM

Very good!

Carnut · May 27, 2018, 08:09:09 AM

Things have slowed down a bit due to equipment and health problems.

But the backside has been painted.

kb426 · May 27, 2018, 10:50:34 AM

Progress is moving in the proper direction.

Carnut · July 04, 2018, 04:43:46 PM

Bet you all thought this project died due to lack of interest.

Well, after many trials and tribulations some progress is being made.

a primer sealer is finally done.

And then we finally get down to the black Acrylic Enamel sprayed on as best we can do it.

Some day we may actually attach it to the car.

kb426 · July 04, 2018, 05:02:59 PM

Attaboy!

idrivejunk · July 05, 2018, 10:42:52 AM

Coolio!

Don't set it outside, birds will think its a pond.

Carnut · July 07, 2018, 05:35:48 PM

OK, we got it installed today, doesn't look half bad even if I do say so myself.

kb426 · July 07, 2018, 06:19:47 PM

Congratulations! T-vicky and you should be very happy.