My body work tools

[Crosley.In.AZ]

It has been a number of years since I smacked a body tool around.

I dug out my old tools since I have the time off work currently.

I'll be danged , they had some rust on them! My hammers had rust on them too.  

I had to wire brush all the tools before I used them.

I wonder if the can of bondo is good still?


I got some dents straightened out on my ol   Falcon

[jaybee]

Wow, they rusted up pretty good!  Maybe I'd better make some time to look at all my seldom used tools, just to be on the safe side.

[57larry]

that rust is telling you something

[river1]

Wow, they rusted up pretty good!

especially considering he lives in sunny DRY AZ  

later jim

[58 Yeoman]

You have more body tools than I do...mine may be rusty too...like me.

[tomslik]

they don't allow me to have body tools....

[SKR8PN]

My body tools are a torch and a bfh.

[Jbird]

My body tools are all green and wrinkley, but they don't rust.   Jbird

[Crosley.In.AZ]

I found one of my D-A sanders... the dang foam has gone bad :!:

It is probably an out of date design too

[MrMopar64]

Crosley.... Let me look I think I have a new one of those that I bought and it was the wrong one but they wouldn't take it back cuz I opened it...
Like I should have been able to see through the box...  

If I have it I'll send it to you if ya want..... I'll look tomorrow  


MM64  

[Crosley.In.AZ]

Crosley.... Let me look I think I have a new one of those that I bought and it was the wrong one but they wouldn't take it back cuz I opened it...
Like I should have been able to see through the box...  

If I have it I'll send it to you if ya want..... I'll look tomorrow  


MM64  

this pad in the photo  uses the Velcro  type of material to hold the sand paper .

[MrMopar64]

I think thats what I have....... Thats why I couldn't use it... I was using stick on paper

MM64  

[purplepickup]

My body tools amount to a set I bought at Harbor Freight about 10 years ago.  I haven't opened the box yet.

Somehow it's comforting to know that you have rusty tools in AZ......as I'm slipping and sliding around in the salty, slushy, snow here in Michigan.

[Crosley.In.AZ]

My body tools amount to a set I bought at Harbor Freight about 10 years ago.  I haven't opened the box yet.

Somehow it's comforting to know that you have rusty tools in AZ......as I'm slipping and sliding around in the salty, slushy, snow here in Michigan.

have not opened the box?  Buy a box cutter.  

I think these body tools got wet when stored in my Mini Storage container I had before I built my work shop.

it was 70*F here today... suppose to rain in a day or so.

I think thats what I have....... Thats why I couldn't use it... I was using stick on paper

MM64

ah , I understand.

[MrMopar64]

Crosley
Here's what I got..... 3M hookit disc pad #05781
fits tools with 5 fastening screws
for use with 8in diameter hookit discs

Let me know if you can use it and I'll send it to you

MM64