2021: What are you doing today

Started by Crosley.In.AZ, January 01, 2021, 11:19:02 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

Charlie Chops 1940

Quote from: "phat46"I drove back from Raleigh NC to the Thumb of Michigan today. We saw a lot of hot rods/Street rods headed south on I 77 and through the middle of Ohio. There must be a NSRA or Goodguys type show going on somewhere south this weekend.

GoodGuys Columbus was this weekend.
A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying. "Wow...that was fun!"

Poster geezer for retirement....

A Hooligan!

phat46

Quote from: "Charlie Chops 1940"
Quote from: "phat46"I drove back from Raleigh NC to the Thumb of Michigan today. We saw a lot of hot rods/Street rods headed south on I 77 and through the middle of Ohio. There must be a NSRA or Goodguys type show going on somewhere south this weekend.

GoodGuys Columbus was this weekend.

Ah, that must have been it, we went right through Columbus, lots of nice rides!

enjenjo

I found a low mileage 6.0 LS today with all the accessories and wire harness for $700 today. I guess that is what is going into the 54. :D I guess I sold those old vans at the right time.
Welcome to hell. Here's your accordion.

enjenjo

I have the LS home, and tomorrow is the ides of July.
Welcome to hell. Here's your accordion.

papastoyss

Quote from: "enjenjo"I found a low mileage 6.0 LS today with all the accessories and wire harness for $700 today. I guess that is what is going into the 54. :D I guess I sold those old vans at the right time.
i have a 6.0 ls/4l80 in my '57 Chevy Handyman. I did go
thru the engine but left it stone stock. I sure like it.
grandchildren are your reward for not killing your teenagers!

idrivejunk

I cleaned up the castings of my new/old carb today. Thats a step closer to trying it out to see if theres still a problem. Somewhere between now and buying the rebuild kit, found another unopened kit in the garage of course. :roll:
Matt

enjenjo

Today we found the oil leak in the power steering rack. It took two hours to find it, and of course the rack had to come out. When the rack was assembled they left out an O ring behind a IFF seat. Five cent O ring and it works fine.
Welcome to hell. Here's your accordion.

WZ JUNK

Quote from: "enjenjo"Today we found the oil leak in the power steering rack. It took two hours to find it, and of course the rack had to come out. When the rack was assembled they left out an O ring behind a IFF seat. Five cent O ring and it works fine.

You can now do the happy dance  :D  Congratulations.  A guy needs some success.
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

phat46

Bought a set of plugs today, Champions, one of them looked like this. The plug on the left has the ground strap short and angled instead of parrallel with the electrode. Can't gap it properly, too tight at the back and too loose at the front. Just another example of cheap parts nowadays I guess.

416Ford

Wrapped up the engine install in Vickie's truck and took it on a 45 mile round trip to a friends house and no major issues. When I got back home, I wired up the trailer light for our camping trip this weekend. Still a few drip from under the truck to track down but the engine is a huge improvement over the last one.
You never have time to do it right the first time but you always have time to do it again.

kb426

TEAM SMART

enjenjo

I've always liked that body style.
Welcome to hell. Here's your accordion.

416Ford

Well this truck is going to kill me.
The power steering is acting up on me again. put 50 miles on the truck Sunday and I went to move it yesterday and the steering is *. I will order up a new pump and a different fluid today and see if that fixes it for more then a week or day.
You never have time to do it right the first time but you always have time to do it again.

Crosley.In.AZ

Quote from: "416Ford"Well this truck is going to kill me.
The power steering is acting up on me again. put 50 miles on the truck Sunday and I went to move it yesterday and the steering is *. I will order up a new pump and a different fluid today and see if that fixes it for more then a week or day.

Decades ago , when I did more general auto repair I hated to have a Ford with power steering problems. The reman pumps usually howled or leaked or pressure was goofy as you mention.  Other friends in the bizness as shop owner or mechanic all had the same stories.
Tony

 Plutophobia (Fear of money)

sirstude

Getting ready to head to the Puyallup Good Guys.  Doing things a bit different this time.  Have a couple of friends going out with their 37 woodie and will ride in with them on Friday and Sat.  I am then entering my truck in the Sunday deal.  Don't know if I told you all about this one I got a couple of years ago.  It is a single cab, short box 2017 Chevrolet Silverado that someone tricked out.  It has 22" snowflake wheels (off a Cad suburban I think), lowered with a Beltech setup 3 in the front and 4 in the back.  Never knew that a 4 wheel drive could be lowered like that until I got the truck.  Paint matched fiberglass tonneau cover. The bed has one of those carpet liners, wish they had not done that, can's carry any dirt of greasy stuff.  Also, whoever built it had to hang the obligitory Flowmasters on it, so it sounds like every other truck out there. All and all, a pretty nice little ride.
1965 Impala SS  502
1941 Olds


Watcher of #974 1953 Studebaker Bonneville pas record holder B/BGCC 249.945 MPH.  He sure is FAST

www.theicebreaker.us