Messages

a lot of news the rebuilder dont wash them clean inside so dont panic yet could be leftovers from where it puked before

has the engine back fired any if so check the power valve, if the vacuum is all over the place you could change the power valve to a diffent size if its moving to much could kill mileage  al

sounds like my 89 caprise did, when the ign. coil was bad   al

Charlie hows the Volvo coming havnt seen any posts lately   al

I probably wont, as of next saturday i have to take a medical  leave of absence from my job, wife isnt doing good   very uneasy on her feet so better to be there 24 - 7 then to have her hurt .  frank if u would bring that bearing ,and if dales there ill have him get it from you, hopely be there next year   al

the engine is a 1977   out of  rv ( has cast crank for sure)  when he bought it they said it had 1500 miles and was stored inside, when we pulled the plugs we seen water, and  when i rotated the crank to get at convertor bolts, 4 cylinders pushed alot of water out .   so we broke it down ,needed main bearings cause the pilot bearing wasnt removed and it interfered with convertor lucky the crank wasnt hurt only the bearing   we put a purple grind cam, rpm performer manifold, steel shim gaskts on the heads and milled .030 off the heads ,  after a good honing and cleaning. ill have him post pictures  he has a 11 inch  convertor   and a few more bolt-ons should run good    thanks  big al

thanks wayne

ok what about the third member whats the  diffence between the pig models  thanks

first we converted it to a 440  from a 383 no pulleys line up. the car was coverted from a 318 before we started on it so any ideas on the correct pulleys,,,, the other question is about the 8 3/4 mopar rear we lookin for a posi i guess theres 3 different pigs we have a 471 are all the parts interchangeable and which is the strongest.       thanks ace

hey guys sept 10 we gonna have a car show at my Advance Auto Parts Store here in Zeeland  Michigan   we have  a ton of room and Vitalies Pizza gonna sell pizza by the slice and will have cold beer and a/c in the shop so easy to take a break ..  i will forward the flyer to frank to post for me cause i just cant get it to work  thanks   al

Advance Auto Parts stocks them and there reasonable

i had my doors and deck lid stripped at american metal stripping , it removed everything inside and out .my question is how do i keep rust from forming between the outer surface the the inner frame.

i like the pop out gas cap door i got to see how you did it , the finished product looks great.

d and e there in holland   have all you need frank

mine are the same frank, the problem is mine are in toledo and im in mich... call jerry sat. mornin and ask him im sure he knows   ace