S10 4x4 T5 parts

Started by enjenjo, January 14, 2011, 07:05:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

enjenjo

Any one happen to have a good mainshaft and extension housing for an S10 4x4 T5? This is for one of our Aussie buddies that can't source them locally.
Welcome to hell. Here's your accordion.

ACEMAN419

d and e there in holland   have all you need frank

Danimal

Quote from: "ACEMAN419"d and e there in holland   have all you need frank

If not, try Dundee Truck & Trim.

wayne petty

in los angeles...

http://www.aagearsandshafts.com/

they have been around for decades ..

i ran across this link yesterday...

under the right hand picture at the top .. is a full T5 rebuild manual..

http://www.ttcautomotive.com/english/products/T-5.asp

there are several others in there also spread out among the transmission pages...


got part casting numbers and transmission tag numbers.. length of output shaft??? perhaps pictures???


does it look like this??

http://image2.onlineauction.com/auctions//2308/zswx-1170440-1.jpg


looks like the casting number is 13-52-066-926    this seems to be the one for the S10 4x4... from 1982....




this list seems to have that casting number on 4 or 5 tag numbers...

so it can be reverse cross referenced to find a tag...

http://mmerlinn.com/catalog/ellegirl25/bw_tkb/bwtkb010.htm

enjenjo

The trans is in Australia. It's a two  wheel drive trans, and to use it he has to convert to 4x4 specs. the only parts needed are the mainshaft, and transfer case adapter.
Welcome to hell. Here's your accordion.