Long ball and socket mount

[sirstude]

I have a friend that is looking for a long shaft ball mount for a Lokar throttle cable.  I looked in McMaster-Carr and don't find anything.  I think he is looking for a 10x32 thread ball end that has about an inch of thread.  He has one of those retro tech 6 deuce EFI units and wants to connect to the front left carb.  We can build a bracket, but a longer ball mount would be cleaner.  Any ideas would be appreciated.

Doug

[enjenjo]

Well, if he has a short one, he could make an extension out of a piece of stainless rod, about 5/16" diameter. Drill it and tap through it 10/32, screw it in one end, and use a button head screw to hold it to the carb.

[kb426]

Morse cable parts?

[wayne petty]

here is the dorman pdf ... just six pages

https://www.dormanproducts.com/catalog/hardware2006/071-076_Sec3_Part8.pdf

the throttle linkages ends are on the last page...  but they still look too short..

so i also agree... making a stand off... or buying one that is already made..

perhaps.. something that is stepped to position it in the carb linkage hole..  with a wide base to spread the load