mustang measurement needed

Started by tomslik, August 03, 2008, 12:26:03 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages1
User actions

tomslik

August 03, 2008, 12:26:03 PM
anybody have a 64-70 mustang that they can get the inside framerail measurement for me?
looking at putting a MII in a 69 rambler and need to know what the distance is at the crossmember...
The last thing I want to do is hurt you. But it\'s still on my list

chimp koose

#1
August 03, 2008, 06:26:31 PM
MII front ends come out of 75-78 mustangs that must be the frame width you are looking for.

tomslik

#2
August 03, 2008, 07:11:07 PM
Quote from: "chimp koose"MII front ends come out of 75-78 mustangs that must be the frame width you are looking for.

nope, but i got the answer off the HAMB.
thanks BUT the answer i was looking for was the 64-70 mustang...

what i want to do is use a heidts crossmember in a 67-69 american..
(i've got the oem mustang II stuff, just not the oem crossmember, nor do i want an oem crossmember) :lol:

well, anyway a mustang (not II) crossmember is about an inch too narrow.
still looks like the nova will be a better fit...
The last thing I want to do is hurt you. But it\'s still on my list

Charlie Chops 1940

#3
August 03, 2008, 07:24:59 PM
Tom, I saw the answer and kinda figured you could engineer a fudge for 1/2" on each side.

Charlie
A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying. "Wow...that was fun!"

Poster geezer for retirement....

A Hooligan!

enjenjo

#4
August 03, 2008, 08:45:52 PM
Welders Series has a universal unwelded crossmember that you can trim as you need it. Paul is a member both here, and on the HAMB. The price is right too.  http://www.welderseries.com/catalog/index.php?cPath=22_25
Welcome to hell. Here's your accordion.
Print
Go Up Pages1
User actions