T Bird power steering rack fittings

Started by WZ JUNK, May 30, 2007, 08:31:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

WZ JUNK

Where can I get the fittings to hook up a T bird power steering rack to a GM pump?

John
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

enjenjo

Depends on what you are using for hoses. If you are using stock type hose, on the return line, you can use the stock Tbird end, and a clamp on rubber hose. For the pressure line you can use the Tbird hose, and reflare the pump end for a GM fitting, or use a GM hose, and a Weatherhead adapter at the rack to fit the pressure fitting.
Welcome to hell. Here's your accordion.

btrc

www.gottashow.com

 I used their hoses on my Comet.  THey have a hose kit for GM pump and T-bird rack.

Bob
Bob

Ed ke6bnl

I had mine made up a Napa.  they put the ends on and since I had very little room I took home the parts and indexed them to the were they would need to line up and had them use the tools to affix the ends. work ok. ED
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,