TPI Tech gauges...

[Chebby]

Hi all,

I'm trying to decide which gauges to use in my 1952 Chevy pickup. I'm VERY interested in a set of 5" quad/programmable speedo with tan faced and stainless steel bezel by TPI Tech (It's a Snap Wiring). I'm having a very hard time finding them. Tan/stainless doesn't seem to be a popular combo and nobody has them in stock... Not even TPI themselves.

Before I go any further, does anyone on here use these gauges? Any problems?

Thank you very much for your time and any input would be greatly appreciated.

Chebby

[348tripower]

We put those in a 51 gmc. No problems at all.
Don

[enjenjo]

I used a set too, no problems.

[Beck]

I need to find a set that I can get an exhaust temp and boost gauge to match. Most rod type gauges don't offer these.

[enjenjo]

I need to find a set that I can get an exhaust temp and boost gauge to match. Most rod type gauges don't offer these.

Classic Instuments will build it.

[C9]

May I suggest you build a sub-panel and mount it under the dash and forward a ways?

The small two gauge panel you see in the pic is not seen by most, but very visible to the driver.

One way to get mis-matched or simply add-on instruments out of the way or view of the public.