th 350 how much slip

Started by Ed ke6bnl, March 21, 2005, 03:52:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ed ke6bnl

I have a 350/350 in my 72 El Camino.  I have 3.08 gears and on the freeway at 60mph and I get on the gas there seems to be a lot of RPM increase far more then the added mph change. seem to be a 5oo rpm increase instantaneously.  Seems to run more rpms then it should for the 26 in dia tires and 3.08 gears.  Then I guess there is the issue of the speedometers acurracy.  Ed ke6bnl How much slip in the th350 is normal. thanks
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,

Crosley.In.AZ

sounds like a stall speed converter , rather than a stock uint.

Do you know if there is a mild stall converter in the tranny?
Tony

 Plutophobia (Fear of money)

enjenjo

Or a convertor going bad.
Welcome to hell. Here's your accordion.

Crosley.In.AZ

or a converter not getting properly filled by the lube system.
Tony

 Plutophobia (Fear of money)

Ed ke6bnl

Quote from: "Crosley"sounds like a stall speed converter , rather than a stock uint.

Do you know if there is a mild stall converter in the tranny?

I just bought the truck after the previous owner ran it into a poll.  We changed out the frame motor put the same trans back in with 3.08 gears.  I hope to upgrade to a 700r4. Don't have any history and the guy I got it from has move out of the area.  Ed ke6bnl
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,