What is it?

[idrivejunk]

[58 Yeoman]

.275 or 7mm for the small one.

[idrivejunk]

Close enough    Thats a mouthful to keep from saying 9/32nds!

http://www.collectingsnapon.com/index.php?page=socket_sets/C9-32inch/9-32%20intro

[idrivejunk]

What is it? Hint: not quarter, not paper towel.

[papastoyss]

Hey, that's my rachet!! (My last name is Midgett)

[Crosley.In.AZ]

plastic stepped tool. It is  3.5 inches long.

I know someone here will know this.  Found this  in tool drawer, sitting in the back of drawer hiding.

By a performance company that has lost much of its name recognition in todays world

[sirstude]

Echlin or (they made Accel) tool for setting max advance.

[1800guy]

The 'M' suffix on the Snap-On ratchets denotes military spec, or military property.  The stepped tool might be a common design - but mine (Red) came with a Mallory Dual-Point dizzy.

[Crosley.In.AZ]

You guys are both correct on the plastic tool use. Timing MAX advance setting of a Mallory dizzy This one is a Mallory piece. Name molded in.

That is from a long time ago for me.  I have used MSD for decades.

[Crosley.In.AZ]

Home made version of a tool.  Specific use in it's day :  years ago.

[tomslik]

350 turbo thingy for the accumulator that always leaks...got a factory one in my tool box i'll never use again (like a LOT of crap in there)

[Rrumbler]

What is it? Hint: not quarter, not paper towel.

I have wound up racking my brain on this every time I come here, but for the life of me, I can't remember where I have seen one of those gadgets or what it is a part of.  It sure looks familiar, though.

[Crosley.In.AZ]

350 turbo thingy for the accumulator that always leaks...got a factory one in my tool box i'll never use again (like a LOT of crap in there)

sell the crap on eBay. :T)

[idrivejunk]

I have wound up racking my brain on this every time I come here, but for the life of me, I can't remember where I have seen one of those gadgets or what it is a part of.  It sure looks familiar, though.

Dad gave me that in an old bolt can, says its a hop-up for a 3/4 HP Briggs. From the "Hey, lets everybody put washing machine engines on our bicycles!" age. Thats right after the clothes pinning playing cards to the fork stage. He used the word throttle but folks call it choke plunger or fuel enrichment valve. I believe the engines are called hit-and-miss. Anyway, that part was said to get over 1HP out of a 3/4 HP stocker. As a kid, Dad was the type to nail some boards together, mount a small engine, find wheels and cobble up steering to go for a ride just because he found something like that.

[idrivejunk]

Garage sale hubcap, don't know what from... so-

What is it? Please tell me