Fuel tank venting

Started by 348tripower, July 13, 2015, 07:22:46 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

348tripower

So I have a tank in the wagon with a Tanks in tank fuel pump. It has a vent provision. I have a vent tube welded in the custom made aluminum tank. I have a Tanks vented cap on the fuel fill tube. What do I do? :shock:
Don Colliau

kb426

I used a piece of hose attached to the Tanks roll over valve and don't have anything on the filler neck.
TEAM SMART

enjenjo

I would plug the vent on the fuel pump, then run a hose from the tank vent into the filler neck just below the cap. That helps when filling the tank, it reduces splash backs, and the vented cap will vent it when the cap is on.
Welcome to hell. Here's your accordion.

348tripower

Quote from: "enjenjo"I would plug the vent on the fuel pump, then run a hose from the tank vent into the filler neck just below the cap. That helps when filling the tank, it reduces splash backs, and the vented cap will vent it when the cap is on.



I have already plugged the pump so I will run the vent to the neck. I am very close to lighting this thing up.:D
Don Colliau

kb426

We are waiting for the video.   :D
TEAM SMART

UGLY OLDS

More updates & Film at 11  :?:  :?:  8)

Bob... :wink:
1940 Oldsmobile- The "Ugly Olds"
1931 Ford sedan- Retirement project

***** First Member of Team Smart*****