Where do these suspension parts come from?

[jaybee]

Can anyone identify where else these ends might be used? They're nice but it's hard for me to think they're custom built and available only from Ridetech, and they seem a bit...pricey.
http://www.ridetech.com/store/musclebar-swaybar/posi-links-components/

[unklian]

https://www.google.ca/search?site=&tbm=isch&source=hp&biw=1024&bih=646&q=10mm+tie+rod+end&oq=10mm+tie+rod+end&gs_l=img.3..0i24.3979.9109.0.9348.16.8.0.8.8.0.150.767.5j3.8.0.msedr...0...1ac.1.61.img..0.16.789.Qlk4JciiO_g&gws_rd=cr&ei=f3_ZVJ3zMtieyAS3qoHoBg#imgdii=_&imgrc=66lH0QKoMJSfRM%253A%3BqX6BM71s5QdxJM%3Bhttp%253A%252F%252Fwww.motopartsdealer.com%252Fimages%252Fproducts%252Fparts%252FE031-019%252F500.jpg%3Bhttp%253A%252F%252Fwww.motopartsdealer.com%252F10mm-tie-rod-end-for-50cc250cc-atv-p-407.html%3B500%3B500

[kb426]

I found this but didn't research to see if it's the same spec.
http://www.vxb.com/page/bearings/PROD/12mm/Kit13991?gclid=CInm_am81sMCFQiPaQod81UACw

[unklian]

As soon as I saw 10mm, I was sure they were imported.

[unklian]

http://www.vxb.com/SRCH.html?Store_Code=bearings&Search=L-Ball+Rod+Ends

[chimp koose]

look like tie rod ends for a riding mower .

[unklian]

90 degrees is SQXXRS, where XX is the diameter in MM.
http://www.findbearing.com/product/industrial-bearing/rod-ends/sq-rs/
Inline is SQZXXRS.
http://www.findbearing.com/product/industrial-bearing/rod-ends/sqz-rs/

[unklian]

IKO and THK should have the same thing.

[unklian]

Of course, EvilBay has everything.
http://www.ebay.com/itm/SQ10RS-L-Ball-Rod-Ends-10mm-Bore-Bolt-Male-Female-Heim-Joint-90-degree-angle-Dia-/130655973397

[jaybee]

Thanks everyone!

I knew these must be stock parts of some description.