Connector disassemble method?

[Crosley.In.AZ]

See photos..  Wire pulled out of this connector. It is a weather pack type with little silicone seal on male end that plugs into this one.

I have tried to release the pin with various hand made tools pushed down into the slot openings and nothing releases the pin.  I tried in the slot opening, next to the pin, from the end where the wire is crimped on , nothing seems to release the pin from the housing

Perhaps a ''one time use'' connector?

[enjenjo]

The pin removal tool works from the other end, looks like a screwdriver handle with a thin wall tube that  fits over the outside of the female pin. Here is the part number for one version  SPX Kent Moore J-38125-10A  You push the tube over the pin, and it all comes out this end.

[wayne petty]

frank is right on how to release it..

it looks like  a 280 series.. but i could not see that exact shape.. but i could be wrong..


there are a few catalogs that should be in ever rodders computer...


this is 404 pages.. and covers a Significant amount of delphi connectors..but not all

http://www.powerandsignal.com/docs/DCS%20Global%20Catalog.pdf


i know there was some talk about the headlight connectors a year or two ago..

here is the headlight connectors section.. the group 59 series..

http://terminalsupplyco.com/Store/Default.aspx?CATDRILL=DEL020&PCAT=54228#Categories


here are the 56 series.. that are used on the headlight switches.. ignition switches..  various switches.

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010&PCAT=54228#Categories

ford and chrysler terminals..

http://terminalsupplyco.com/Store/Default.aspx?CAT=T010070&PCAT=77370#Categories


just thought i would share the links..