fuel hose

Started by papastoyss, March 03, 2011, 03:33:31 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

papastoyss

I have heard that ethanol blended gas will degrade ordinary rubber fuel hose. Does anyone know of a flexable fuel line (not braided ss) that will withstand the blended gas?
grandchildren are your reward for not killing your teenagers!

unklian

I've been using the rubber fuel injection hose,
with up to 10% Ethanol. No problems so far.

BFS57

Hello;
NAPA has nylon fuel line that can be used with some crimp on ends. This line comes in 3/8" or 5/16" and is used to change a carberated car to FI!

Not supposed to be too costly!

Bruce

wayne petty

AZ has goodyear fuel injection hose.. that is rubber jacketed... but has a rigid blue plastic liner...  it has to be used with hose barbs... and clamps or crimped barrels...   it comes in 1/4. 5/16. 3/8    do not think that you can use the next size larger and just squeeze it down with clamps... i tried that one day...  its not possible..

detail on the lined Fuel Injection Hose SAE 30R9

http://www.goodyearep.com/productsdetail.aspx?id=5144



conventional fuel hose is also available there...

Fuel Line/PCV/Emission Control Hose SAE 30R7
specs

http://www.goodyearep.com/ProductsDetail.aspx?id=10526



as long as we are on the subject... how about fuel fill hose...

Fuel Fill Hose SAE 30R6

http://www.goodyearep.com/productsdetail.aspx?id=10414

these are listed in 3 ways...  

45 degree bends... 8 inches on each leg..

90 degree bends  8 inches each  leg

 and 36 inch long straights..

papastoyss

Thanks for the info, just what I needed.
grandchildren are your reward for not killing your teenagers!