hydroboost question

Started by kb426, February 15, 2016, 06:13:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kb426

In the pic, you can see the plastic plug that is where the spool is. It has a small leak. There's an oring on the plug. What do I need to know to pull the plug and replace the oring or whatever is necessary to stop the leak. I didn't find and info about this. I found a diagram of all the parts but no info about disassemble or whether the oring is something unit specific. Thank you.
Yes, it's about the last Mustang part on the whole truck! :)
TEAM SMART

enjenjo

As I recall, that plug should not see a lot of pressure. I believe your problem lies deeper in the spool itself
Welcome to hell. Here's your accordion.

chimp koose

OMG you are making me rethink the whole parts car donor thing.Did the license plate or serial # on that mustang read 666 anywhere? :twisted:

kb426

No tag but it had a rebuilt title so the original number was gone. It certainly reminds me of a 90 year old passing away that's an organ donor. Not too many good parts left. :)
TEAM SMART