fuel hose

[papastoyss]

I have heard that ethanol blended gas will degrade ordinary rubber fuel hose. Does anyone know of a flexable fuel line (not braided ss) that will withstand the blended gas?

[unklian]

I've been using the rubber fuel injection hose,
with up to 10% Ethanol. No problems so far.

[BFS57]

Hello;
NAPA has nylon fuel line that can be used with some crimp on ends. This line comes in 3/8" or 5/16" and is used to change a carberated car to FI!

Not supposed to be too costly!

Bruce

[wayne petty]

AZ has goodyear fuel injection hose.. that is rubber jacketed... but has a rigid blue plastic liner...  it has to be used with hose barbs... and clamps or crimped barrels...   it comes in 1/4. 5/16. 3/8    do not think that you can use the next size larger and just squeeze it down with clamps... i tried that one day...  its not possible..

detail on the lined Fuel Injection Hose SAE 30R9

http://www.goodyearep.com/productsdetail.aspx?id=5144



conventional fuel hose is also available there...

Fuel Line/PCV/Emission Control Hose SAE 30R7
specs

http://www.goodyearep.com/ProductsDetail.aspx?id=10526



as long as we are on the subject... how about fuel fill hose...

Fuel Fill Hose SAE 30R6

http://www.goodyearep.com/productsdetail.aspx?id=10414

these are listed in 3 ways...  

45 degree bends... 8 inches on each leg..

90 degree bends  8 inches each  leg

 and 36 inch long straights..

[papastoyss]

Thanks for the info, just what I needed.