Square switch in round pipe

Started by Crosley.In.AZ, February 27, 2005, 07:14:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Crosley.In.AZ

Several years ago my remote control  broke for my trailer winch.

I have used the bare wire ends to winch stuff onto the trailer since a new controller was $65.

today i went to radio shack , bought a dual action momentary contact switch rated at 25 amps ( plastic piece)..

I heated up a piece of PVC pipe (see burn marks) and jambed the switch in. I plugged the wire ends onto the spades of the switch.  I used a PVC reducer to narrow the open end.

I then filled the cavity with some urethane caulking.  Works like a champ!

I must be a genius.... just a little slow gettin things done :wink:
Tony

 Plutophobia (Fear of money)

parklane

Tony     You would make a heck of a dutchman :wink: It's not that we're frugal, it's just that we're cheap, after all, our favorite word is FREE!!! :lol:  :lol:
If a blind person wears sunglasses, why doesn\'t a deaf person wear earmuffs??