Fuel tank venting

[348tripower]

So I have a tank in the wagon with a Tanks in tank fuel pump. It has a vent provision. I have a vent tube welded in the custom made aluminum tank. I have a Tanks vented cap on the fuel fill tube. What do I do?

[kb426]

I used a piece of hose attached to the Tanks roll over valve and don't have anything on the filler neck.

[enjenjo]

I would plug the vent on the fuel pump, then run a hose from the tank vent into the filler neck just below the cap. That helps when filling the tank, it reduces splash backs, and the vented cap will vent it when the cap is on.

[348tripower]

I would plug the vent on the fuel pump, then run a hose from the tank vent into the filler neck just below the cap. That helps when filling the tank, it reduces splash backs, and the vented cap will vent it when the cap is on.

I have already plugged the pump so I will run the vent to the neck. I am very close to lighting this thing up.

[kb426]

We are waiting for the video.  

[UGLY OLDS]

More updates & Film at 11  :?:  :?:  

Bob...