hydraulic throwout bearing/clutch

Started by Topsterguy, September 30, 2008, 11:37:06 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages1
User actions

Topsterguy

September 30, 2008, 11:37:06 PM
Hey folks!  I'm putting a Borg Warner Super T-10 4-speed in my 40 pickup and would like to use a hydraulic throwout bearing / clutch setup rather than the usual fork setup. Anyone done this and have ideas on what to use, OEM or aftermarket, part numbers, and pics , and advice etc !?  Thanks!
"If a man is alone in the forest and speaks, and there\'s no woman around, is he still wrong?"

enjenjo

#1
September 30, 2008, 11:53:06 PM
I have used Tilton with good success.  http://www.tiltonracing.com/content.php?page=hydraulic
Welcome to hell. Here's your accordion.

tomslik

#2
October 01, 2008, 04:30:12 AM
fwiw,i've got a Howe that i'm gonna use in one of my ramblers...
The last thing I want to do is hurt you. But it\'s still on my list

mrloboy

#3
October 02, 2008, 12:52:09 AM
I used a Howe in my V-8 S10 with a T5 for my son's pickup. It has been in the truck for 3 years and works great. The mastercylinder on the S-10 is 15/16". Howe calls for a 7/8" master which would likely be much more user friendly. Simple installation. Price from Speedway was great too. I had quite a time bleeding the system completely, but once it was complete, it worked well. The truck is driven year-round including the -40 Canadian winters. Rick
Print
Go Up Pages1
User actions