home made brake adapter

Started by enjenjo, November 10, 2008, 11:18:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

enjenjo

November 10, 2008, 11:18:13 PM
On Fatcat's Chevy, we are using a Ford F150 master cylinder, on a Mustang booster, under the floor. I needed some adapters to hook up the lines for a remote fill, so I turned these on the lathe. These get a tubing bib for 5/16" tubing to the reservoir.
Welcome to hell. Here's your accordion.

sirstude

#1
November 11, 2008, 09:32:55 AM
Great minds think alike, that is exactly what I did on my Studebaker when I built it.  I also milled out a reservoir that mounted on the firewall.  That was the total projects that I made when I took an adult ed machining class while they still offered it here.

Doug
1965 Impala SS  502
1941 Olds


Watcher of #974 1953 Studebaker Bonneville pas record holder B/BGCC 249.945 MPH.  He sure is FAST

www.theicebreaker.us

El Jefe

#2
November 11, 2008, 01:00:00 PM
Quote from: "sirstude"Great minds think alike, that is exactly what I did on my Studebaker when I built it.  I also milled out a reservoir that mounted on the firewall.  That was the total projects that I made when I took an adult ed machining class while they still offered it here.

Doug

El Jefe

#3
November 11, 2008, 01:00:57 PM
Quote from: "sirstude"Great minds think alike, that is exactly what I did on my Studebaker when I built it.  I also milled out a reservoir that mounted on the firewall.  That was the total projects that I made when I took an adult ed machining class while they still offered it here.

Doug
Print
Go Up Pages1
User actions