Holley carb / kit and a Dodge Lancer

[enjenjo]

just make sure all the bits you bolt together match. sometimes there are passages that don't line up.

[sirstude]

Make sure the throttle shafts are tight.  Nothing will drive you crazier than trying to find the problems caused by throttle shaft leaks.

Doug

[wayne petty]

ok.. the upper left looks like a domanator.  the upper right looks like an 850  and the lower two ... call the copps !!!! someone stole the airhorns... those are tiny looking... are those list 8007 390 cfm carbs...or is it just the others look so big...

i have been playing with carbs since i was 10 or so...  i took the 43 willys mb carter WO carb apart and put it back together so many times i wore out the threads...and for my 2 cents on booster venturi design... i have a holley two barrel that has none... just machined venturis with a row of holes around the venturi.....last guy i let borrow it it took months go to get it back.. for thos carb guys.. it is a list 6425 .650 cfm model 2300 2bbl...photos next time it comes out of its box...

[wayne petty]

eats??     hmmm... arizona.... a tiny bit too far... soon maybe...


try this link
https://www.dormanproducts.com/cgi-bin/vm91corp30r/item-dtl.w?sid=0x0065d466&item=323319&icrid=&clt=hwrap1&vsrch_str=&vsrch_brand=all&vsrch_cat=Brass%20Fittings,Fuel%20Hose%20Fittings&st_amount=0&end_amount=999999999.99&start=30&vfrom=&prev=yes&vnext=yes&category_list=1360:898:0


or this angled inverted flair fuel line fitting...

https://www.dormanproducts.com/cgi-bin/vm91corp30r/item-dtl.w?sid=0x0065d466&item=492-025&icrid=&clt=hwrap1&vsrch_str=&vsrch_brand=all&vsrch_cat=Brass%20Fittings,Fuel%20Hose%20Fittings&st_amount=0&end_amount=999999999.99&start=70&vfrom=&prev=yes&vnext=yes&category_list=1360:898:0

i probably have a banjo fitting like you need with the banjo bolt and washers... i will look and see in my vw bus storage ...

do you still have the walkerproducts link... i have found out that i have at least one parts store that buys from them on a regular basis..  and i have an account there... which size inlet hose do you want... 5/16 or the more obvious 3/8 hose...