S10 Steering Column Schematics - Help?

Started by loiselle, January 12, 2007, 08:09:51 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

loiselle

I have a 1990 Chevy S10 tilt steering column in my rod. It has two plugs on it.  One I know goes to the fuse box.  The other I do not know what to do with it.  I assume it has something to do with wipers, washer, and cruise control, but do not know how to use it.  Does anyone have a schematic of this column's wiring or know where I can get one.  My local Chevy dealer doesn't and Alldata doesn't either.

Help? :?:
Larry D. Loiselle
30maccp@gmail.com
http://loiselle.witnesstoday.org/
Be Righteous Not Politically Correct

rooster

What is your colume out of stick or auto trans? If auto you might be looking at Netural safty stw plug. Wiring from wiper are usually very small, you might ID them that way

loiselle

The column was from a floor shift vehicle.  It is about 4 inches wide and has a bunch of wires to it.
Larry D. Loiselle
30maccp@gmail.com
http://loiselle.witnesstoday.org/
Be Righteous Not Politically Correct

rooster

If you go to Painless wirings web site you should find directions from a GM wiring kit that tells you the color of GMs wires and there purpose. Could also do a search here.

model a vette

Should be something like this:

E - tan from drivers door switch for key buzzer ground with door open
F -Light green from "key in ign switch" warning buzzer
G - black to horn switch
H- Light blue to left front turn signal and left turn dash indicator
J - Dark Blue to right front turn signal and right turn dash indicator
K - Brown from hazard flasher
L - Purple from turn flasher
M - Yellow to left rear turn signal/brake light bulb
N - Dark Green to right rear turn signal/brake light bulb
P - White from brake light switch
Ed