4-link geometry

[SKR8PN]

hey guys,
thanks for the interest in my post.
im building a street rod.
im setting up a 4 bar, not 4 link.
wish i could post a pic here.

Sorry I kinda hijacked your thread

Ok........since you are doing a four BAR setup,that makes life a lot easier
All four rods need to be level at ride height. Next thing you need to decide is HOW you are going to keep the rearend centered in the chassis. There a couple of different things you can do,depending on how much space you have. You can use a diagonal link,a panhard bar or a wishbone like this...
http://www.artmorrison.com/4link/index.cfm

[SKR8PN]

Here is a picture of a triangulated four link rear suspension setup..
http://www.popularhotrodding.com/tech/0604_rear_suspension_guide/photo_07.html

No need for a watts link or a panhard bar with this setup.....