Tap needed

[enjenjo]

Anyone have a source for an 11/16" by 18 left hand tap? Best deal I have found is $90.

[Dave]

Anyone have a source for an 11/16" by 18 left hand tap? Best deal I have found is $90.

I can check for you tuesday
Dave

[GPster]

Speedway used to have them in their catalog  and I didn't think they were that much but maybe it was an old catalog. I've always been real cheap  and saved all the drag links and tie rods and spliced them in the middle so that I had factory threads on the ends. GPster

[C9]

Speedway.

http://www.speedwaymotors.com/xq/aspx/display_id.3106/itemNo.tap/qx/Product.htm

$29.95 for LH.
$19.95 for RH.

They have LH and Rh in 3/8", 1/2", 5/8" & 3/4" in NF.
(They may have 7/16 NF LH, but it wasn't listed.
I'm guessing a catalog slip-up.

They seem to be ok taps, I've had a set of 11/16" and made my own tie rod and drag link as well as a set for another guy.
Granted, not a whole lot of threading, but they seem as sharp as ever.

[enjenjo]

That will do it, much more reasonable. thanks