Need tool to insert windshield moulding filler piece

Started by Ed ke6bnl, January 01, 2006, 03:43:21 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Ed ke6bnl

I helped a friend install a new windshieldin his E Type Jag and the  new rubber molding. It went pretty good but to manually install the rubber filler piece  that goes in the grove of the molding is a problem.  I recall there is a tool that spreads the groove open while you feed the filler and helps to feed the rubber strip.  Any help in finding a place that sells the tool or any other suggestions is appreciated thanks Ed ke6bnl
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,


Ed ke6bnl

Quote from: "enjenjo"heres one  
 
http://www.windshieldsupplies.net/xcart_directory/catalog/CRL-Swivel-Tip-Locking-Strip-Tool-p-16144.html

I told the fellow at church that I could count on this group and enjenjo in particular to come up with the information.  My friend is a car guy all his life and retired know but no intrest in the internet so I thought I would do him a favor, maybe I can get him to  monitor this site after this.  thanks again Ed
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,