Transmission speedo adapters

[oddjob]

Hi All
Been busy helping a friend with his 37 ford hump back it was a 60sa drag car and all modification was done with a smoke wrench we changed the cross member to a chassi engineering ,the problem is it,sa a four speed car chevy 327 with a m22 trans the cable speedo worked but with an electric speedo there is no room for the pulse gereator to fit between the linkage we need a flexible shaft or an extension where we can make a hole through the cross member and mount the * generator on the out side of the cross member any ideas  Russ

[WZ JUNK]

Hi All
Been busy helping a friend with his 37 ford hump back it was a 60sa drag car and all modification was done with a smoke wrench we changed the cross member to a chassi engineering ,the problem is it,sa a four speed car chevy 327 with a m22 trans the cable speedo worked but with an electric speedo there is no room for the pulse gereator to fit between the linkage we need a flexible shaft or an extension where we can make a hole through the cross member and mount the ##### generator on the out side of the cross member any ideas  Russ

I have had good luck with these people.  http://www.speedometershop.com/  You might give them a call.

[enjenjo]

You can get a short cable through a NAPA dealer. It's listed in the book for a Ford, but will work on a GM trans. I'm not where I can check the books right now, or I'd get the number for you.