Plastic body repair

[tomterrific]

I have a 92  Bonnie that needs some body repair . Any of you know of or have experience with products (like fiberglass, bondo etc) that will work on plastic this * plastic body?

[parklane]

Have you tried model glue   Just kidding

[50chevydan]

To do it right you will need a plastic welder and plastic rod. You choose the rod by what type of plastic it is (thermoset or thermosetting), there is a code on the main piece. You actually use an adhesive from 3m for your filler, before you use it though you must spray an antistatic on there. Then you sand it and work your way down to 220 grit and then it can be primed. If you have any questions on some of the things needed I would look on 3m's website.If you are talking about fiberglass 3m have a kit for that also and you just need to prep the glass first and have mat for the deeper holes and gashes.

                                                           Dan