Im new but unfortunatel, some might know me!

[DIRTYT]

It was suggest to me on saterday at the garage crawl that i would like it over here. So if i end up sucking you have denise to blame  

My names Bryan im from Troy,MI. I used to work on late models for a used car lot but now im trying to buy and sell beaters.

I have a few cars... currently trying to get my 50 chevy coupe done before summer comes. im doing a chop and a hardtop conversion. allso re working the grill area and changing out bumpers and installing a caddy 390 with a jetaway in it.

All so picked up a 68 chevelle in augest for my girl friend and ijust put a th400 in that and am slowley getting it ready for paint. but its my daily driver right now.

And lastley i have a 67 galaxie 500 fast back coupe. 390FE with an auto. needs some work but i think im going to ebay that one soon.

im going to try to post a few pics so look out!

allright bye
Bryan

[Dave]

It was suggest to me on saterday at the garage crawl that i would like it over here. So if i end up sucking you have denise to blame  

My names Bryan im from Troy,MI. I used to work on late models for a used car lot but now im trying to buy and sell beaters.

I have a few cars... currently trying to get my 50 chevy coupe done before summer comes. im doing a chop and a hardtop conversion. allso re working the grill area and changing out bumpers and installing a caddy 390 with a jetaway in it.

All so picked up a 68 chevelle in augest for my girl friend and ijust put a th400 in that and am slowley getting it ready for paint. but its my daily driver right now.

And lastley i have a 67 galaxie 500 fast back coupe. 390FE with an auto. needs some work but i think im going to ebay that one soon.

im going to try to post a few pics so look out!

allright bye
Bryan

Welcome Bryan
Dave
Jackson,Michigan

[enjenjo]

Welcome to the RRT!

[Crosley.In.AZ]

Welcome aboard the board

[Sean]

Welcome to the RRT...

[rooster]

Welcome aboard! Have been checking out some of the progrees you been making on the grill in the chevy! Neat!

[SKR8PN]

Welcome DIRTYT ! I have been following some of your posts on the H.A.M.B. and I like what your doing to the Chev.  You'll like it here.

[phat rat]

welcome Dirty, did you get that F-1 grille in the car yet?

[tom36]

Welcome to the RRT. I like the looks of that hardtop/chop.  Tom..

[Charlie Chops 1940]

Glad to see ya last weekend Bryan. There is life outside the HAMB but it usually requires cessation of our meds.....welcome to more mellow place. I think you may find this a good place too, just different from the other. I can't live without either anymore.

Charlie

[KustomLincolnLady]

Welcome aboard Bryan. I guess we won't hold it against you that you know Denise       (just kidding)!!!     Things are a lot more laid back here than on the Hamb. But I can keep up!! ha ha
Chevy coming out this summer???    Cant wait to see it, looks nice so far!
Debb

[DIRTYT]

Thanks for all the warm welcomes. (unfortunatel    and to think i spell checked that crazy looking word and thats what aol came up with) o well you will just have to exuse my poor spelling and what not. i like cars not english class  
im digging all these crazy little smiley jobs. i havent done much with the grill as of yet. im still waiting and hoping to get a new welder for x-mas.(traded my old one for the chevelle doh!)

so far this week i have been working on mocking up mounts and trying to get this big caddy 390 to fit in my chevy. The orig plan was for a sbc but i got this motor for free last sunday and planned on using it in a model A project i have in mind. But it was in the garage and i just had to see if it would fit.And * right it does. exhuast manifolds even exit in happy places  

here are a few more pics of where im going with it. 52 F1 grill 57 chevy front bumper sectioned and chopped all to hell to fit right.(keep in mind this is a ruff mock up picture) and on the rear i have a photo shop done by mike from flordia (4t64rd) i want to use 56 cadillac dagmars with the flame throwing exhuast exiting under them. the orig idea was for a nice slim taillight (50 ford?) but im now wanting to install some pointy fin/qtr panel extensions. with 58 chevy tail lights mounted verticly (sp)

dont know if ill get to far into the rear areas of the car this winter. well see how well the rest comes together.

any way sorry for being so long winded. heres some pics for ya..

[DIRTYT]

a little cool shot i took the other day. with the new caddy engine and u can see the chevelle in there. and some of my moms 67 camaro im doing some body work on for her.

[DIRTYT]

and heres mikes photo shop for me.This here has got me all wound up. i wasnt sure how it would look cause ive never seen it done before. But i tell you what i cant wait to make it happen. Just need to find me some dagmars now! Im still not sure about frenching the plate in. i think i just might tuck it underneith. ihate plates there ugly. i may just drag it like i did my last one... till it falls off (like my last one)

ok enough with taken up all the bandwidth for my silly car

Thanks Again guys/gals
Bryan

[KustomLincolnLady]

and heres mikes photo shop for me.This here has got me all wound up. i wasnt sure how it would look cause ive never seen it done before. But i tell you what i cant wait to make it happen. Just need to find me some dagmars now! Im still not sure about frenching the plate in. i think i just might tuck it underneith. ihate plates there ugly. i may just drag it like i did my last one... till it falls off (like my last one)

ok enough with taken up all the bandwidth for my silly car

Thanks Again guys/gals
Bryan

LOL   We did that with our plate on the Pontiac, it was so low it just got all bent up     , then it fell of on the way back from the trip to Hel and back!!! LOL  but we found it along the highway about 4 days later and 30 miles from home. got run over a lot of times, just hammered it out, LOL (it was sentimental) personalized plate, not cheap in Indiana.
I like the mock up of the back!!!!!!!!   But then I'm a custom girl!!
Debb