2024: What are you doing today?

Started by Crosley.In.AZ, January 01, 2024, 07:11:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sirstude

Getting ready to head down to the Grand National Roadster Show on Thursday morning early. It is about a 1200 mile drive down there.  We are having late spring weather up here, it was 62 degrees in Great Falls yesterday, so not getting the big weather change by going down this year.  Might even be worse weather down there that up here.
1965 Impala SS  502
1941 Olds


Watcher of #974 1953 Studebaker Bonneville pas record holder B/BGCC 249.945 MPH.  He sure is FAST

www.theicebreaker.us

kb426

TEAM SMART

enjenjo

I finally got my Lincoln LS rear end back today. It's in very nice condition. I have to check the ratio, it is supposed to be a 3.55 gear.
Welcome to hell. Here's your accordion.

Crosley.In.AZ

#93
Covered a hole in exterior wall of the park model we live in.. Remnants of a mini split of ancient yrs gone by. Power, drain , etc was all in one hole.  Previous cover was that aluminum type tape used in HVAC stuff.

I found some misc exterior wall panels under the park model. Cut out a piece. Some pop rivets, silicone caulk.. done. Only took me 2 yrs, 4 months to patch the hole correctly
Tony

 Plutophobia (Fear of money)

enjenjo

Good job speedy Andale! Yee! Hah!
Welcome to hell. Here's your accordion.

Crosley.In.AZ

#95
Did some body work on the skirting on this old park model.

Some I could straighten. Others I put wood backers to hold it straight.

I gave the whole wall a warsh with wash & wax chemical sprayed with a H-Freight sprayer for a water hose.  Simple Green was used too. The skirting is a little cleaner. LOL

 8) 
Tony

 Plutophobia (Fear of money)

idrivejunk

Rail patch ahead of LR wheel, 73 Mustang.
Matt

kb426

Looks good, Matt. Is the other side the same?
TEAM SMART

idrivejunk

Thanks. Nope. Didn't have a spring eye just lopped off due to siezed bolt either (see bottom pic on left). That was heck to cut out but at least there was burnout box scent to savor. That rail rustout went right up to where the tub notches will start. It gets go-goodies later.  :)  :arrow:
Matt

WZ JUNK

I chopped a top or I made a pickup roadster today.  I am working on the latest yard art square body Chevrolet truck.
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

kb426

It was late when UPS arrived today. He brought me a box of 8' led bulbs. I replaced a few before stopping today. It's going to be better for a blind old guy. :)
TEAM SMART

58 Yeoman

Bill, I've replaced all the fluorescent fixtures with LED lights; shop, basement rooms, two outbuildings.  Threw the old fixtures away, no one wanted them.  Gave the box of new bulbs to Habitat for Humanity.
I survived the Hyfrecator 2000.

"Life is what happens when you're making other plans."
1967 Corvair 500 2dr Hardtop
1967 Corvair 500 4dr Hardtop
Phil

Crosley.In.AZ

Took a break. Watched some early 50s Gene Autry tv shows. The industry was young. The acting, sets, background scenes were a bit crude. Makes them shows classics
Tony

 Plutophobia (Fear of money)

WZ JUNK

I will fit and attached the doors to the yard art project today and then I will move it out of the way.  The next part will be cutting the bed and tailgate.  I hope to paint this one and make it all white.  After the sheet metal is done, I intend to build a tubular steel frame with casters to attach the body parts and make it moveable in the yard.
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

kb426

I finished changing out the bulbs in the shop this morning. I should have done that a couple of projects ago. :) I have a list of items to be completed before the next project. Most are tool related.
TEAM SMART