2024 : Tool Reviews:

Started by Crosley.In.AZ, January 02, 2023, 03:13:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Crosley.In.AZ

#75
Had this battery - charging system  tester for a while. Foxwell BT-705 .  I have watched that Youtube guy Project Farm use it for testing batterys.

It has more features than I need or use.  I have not tried them all , the bluetooth, printing, etc.

Cord is a little over 6 foot length..  I can sit in small cars for test on charge system, since the throttle needs blipped after starting the engine , etc .. hard to blip throttle by hand  on this electronic crap drive by wire throttles
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

Harbor Freight has new (?) sales deal.. Each wednesday they have a Flash Deal on 1 item.

Today it is a 18ga brad nailer .  Bauer brand, tool only. Cordless. In Store only.

I do not use the Harbor Freight battery line.  Could use an adapter like I have for my string trimmer that fits the tool and Dewalt battery 20v line?

 8)
Tony

 Plutophobia (Fear of money)

enjenjo

I have Carpel tunnel in both hands. This creates problems trying to open jars.  I bought this tool, Robotwist  https://www.amazon.com/Robotwist-Automatic-Improved-Opening-Performance/dp/B08779FHLS?th=1 thinking it was probably a piece of crap that would not work. In the three plus months I have had it I have yet to find a bottle or jar it won't open. I am impressed.
Welcome to hell. Here's your accordion.

Crosley.In.AZ

#78
Quote from: enjenjo on August 21, 2024, 11:22:37 PMI have Carpel tunnel in both hands. This creates problems trying to open jars.  I bought this tool, Robotwist  https://www.amazon.com/Robotwist-Automatic-Improved-Opening-Performance/dp/B08779FHLS?th=1 thinking it was probably a piece of crap that would not work. In the three plus months I have had it I have yet to find a bottle or jar it won't open. I am impressed.


Interesting item... couple weeks ago we had a new jar of minced garlic. Wife handed it to me after she tried with her rubber disc lid gripper did not help her.. As I was trying to force open this lid I thought "holy sheet" I may not get this lid  loose.

:o
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

Quick update on these stick on bit holders for cordless drill driver tool.

I have used my driver tool a lot recently.  The bits vibrate out of this holder.  The holder on top of the tool gets in the way in tight spaces.

A good idea that is OK for some applications.  In limited use. I have had good luck with them
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

Bought a Harbor Freight tile scraper.  Air powered unit.  Trying to remove some 50 year old , thick tile from concrete.  I am using a propane torch to heat the tile and then hit it with this pneumatic   scraper.

This olde tile is near the thickness of commercial tile.  Double the thickness of regular vinyl tile.
Tony

 Plutophobia (Fear of money)

kb426

Tony, in case you haven't seen one, there is a tile remover that is electric motor driven that has a scrapper on the bottom of it. It has a handle and you push against it to allow it to do it's job. I think most rental places have them. Might be an option.
TEAM SMART

Crosley.In.AZ

#82
Quote from: kb426 on September 28, 2024, 06:21:49 PMTony, in case you haven't seen one, there is a tile remover that is electric motor driven that has a scrapper on the bottom of it. It has a handle and you push against it to allow it to do it's job. I think most rental places have them. Might be an option.

Found this tool at Home Depot in Show Low AZ.. Rental tool .. With fees and taxes added in: it is $110.00 a day. If I can get laundry room tile removed quicker and the 2 car garage is ALL vinyl sheet product in bad condition. May be worth it for 2 days work I figure?
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

#83
Quick comment on Harbor Freight rotary hammer drill Bauer brand. Its the corded 10amp model, SDS tool bit design.

I also bought the 8 inch SDS Warrior brand bits. They calll them 8 inch long , yet only drill part is 6 inches long?  Both have decent reviews..  I had a Milwaukee hammer drill that puked about 10 yrs ago. This Bauer drill is way faster.

Only 6 holes have been drilled so far ...  4 on the mailbox mount onto concrete

It drills well, seems well balanced. That very olde saying: Time will tell on how well this works..

:idea:
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

#84
We bought this 5 foot long folding table that has metal on half and plastic surface on the other side.  Since the kitchen is  apart (gone ) on this house we needed a surface to cook on safe for hot stuff.  We also use the Blackstone griddle a lot.

Amazon and Wally World had this Lifeline brand table at the same price : $140.00  aka $139.99

When Amazon Daze arrived the price dropped to $99.99 on this table.  So far , it works real well..  It is heavier weight since one side is metal
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

Heads up on Harbor freight 9 volt batterys. I bought some Thunderbolt alkaline 9 volt batterys for the RV smoke detector.  1 battery Lasted 5 months
Tony

 Plutophobia (Fear of money)

Crosley.In.AZ

#86
I've had these parts carts for decades.  The wheels have Never rolled well. You know the type.. The 4 swivel castor wheels often steer themselves?

THis move to the new to us house, these carts  self steering , roll hard , really whiz'd me off. I bought 2 sets of wheels on Amazon after a search. Hard rubber wheels. 6 inch diameter, I thought about 8 inch , decided it was too high.  I wanted a larger wheel to roll over stuff?

I put a piece of plywood on the bottom to beef up the light duty steel tray of the cart.  1st photo is finished product.. Obivously I used 2 fixed wheels at one end.. 2 Swivel wheels at other end. Rolls nice now. I added a bunch of weight, still rolls well and it steers !

8)
Tony

 Plutophobia (Fear of money)