SS Exhaust Hangers

rumrumm · October 05, 2004, 11:58:12 AM

Does anyone have a source for stainless 2 1/2 inch exhaust hangers and clamps--need a pair. Thanks.

slocrow · October 05, 2004, 12:10:15 PM

Lynn; I think Stainless works offers them. Not cheap I'm sure. Frank

http://www.stainlessworks.net/

enjenjo · October 05, 2004, 12:10:49 PM

Never-Rust 412 786 7775 You can also get them from Lane Automotive.

PCFree · October 05, 2004, 02:29:51 PM

Quote from: "enjenjo"Never-Rust 412 786 7775 You can also get them from Lane Automotive.

Borla Exhaust does all that SS stuff even SS band clamps (vs the old compression clamps)

rumrumm · October 05, 2004, 03:37:20 PM

I have seen the clamps on a couple of different sites but not the hangers. I know somebody makes them because I saw the once.

PCFree · October 05, 2004, 03:40:40 PM

Quote from: "rumrumm"I have seen the clamps on a couple of different sites but not the hangers. I know somebody makes them because I saw the once.

I have installed a number of Borla exhaust systems and they come with SS hangers. Go to their web site and send them an e-mail for wheat you want

34ford · October 05, 2004, 09:01:53 PM

Lynn,

Here's the ones I used on my coupe. They are raw stainless steel so if you want you can polish them. They come with the hose type clamp and the neophrene support bushings. The bushings come in red, blue and black. Scooter used them on Project 33 also. Think there $25 a pair now. http://www.stainless-specialties.com/

Bob

rumrumm · October 06, 2004, 08:03:18 AM

Thanks, Bob. That was what I was looking for. You da man!

34ford · October 06, 2004, 04:24:50 PM

Quote from: "rumrumm"Thanks, Bob. That was what I was looking for. You da man!

Glad it was the one. It is the only one I know of. Pick mine up at the Nationals in years past. They had a bunch of them laying on a table.

bob

PCFree · October 06, 2004, 04:32:12 PM

Quote from: "34ford"
Quote from: "rumrumm"Thanks, Bob. That was what I was looking for. You da man!

Glad it was the one. It is the only one I know of. Pick mine up at the Nationals in years past. They had a bunch of them laying on a table.

bob

Not to sound critical or picky, but a hose clamp? Looks tacky. Borla has SS muffler clamps that look like muffler clamps. They don't use them to seal the pipe but use them for their hangers.

rumrumm · October 06, 2004, 04:54:39 PM

I was planning to use that hanger with a ss muffler clamp that I can get from my local Dynomax dealer. They have ss clamps but not the hangers.

PCFree · October 06, 2004, 04:57:19 PM

Quote from: "rumrumm"I was planning to use that hanger with a ss muffler clamp that I can get from my local Dynomax dealer. They have ss clamps but not the hangers.

Gotcha!