SS Exhaust Hangers

Started by rumrumm, October 05, 2004, 11:58:12 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

rumrumm

Does anyone have a source for stainless 2 1/2 inch exhaust hangers and clamps--need a pair. Thanks.
Lynn
'32 3W

I write novels, too. https://lsjohanson.com

slocrow

Lynn; I think Stainless works offers them. Not cheap I'm sure. Frank

http://www.stainlessworks.net/
Tell the National Guard to mind the grocery store...

enjenjo

Never-Rust 412 786 7775 You can also get them from Lane Automotive.
Welcome to hell. Here's your accordion.

PCFree

Quote from: "enjenjo"Never-Rust 412 786 7775 You can also get them from Lane Automotive.

Borla Exhaust does all that SS stuff even SS band clamps (vs the old compression clamps)

rumrumm

I have seen the clamps on a couple of different sites but not the hangers. I know somebody makes them because I saw the once.
Lynn
'32 3W

I write novels, too. https://lsjohanson.com

PCFree

Quote from: "rumrumm"I have seen the clamps on a couple of different sites but not the hangers. I know somebody makes them because I saw the once.
I have installed a number of Borla exhaust systems and they come with SS hangers.  Go to their web site and send them an e-mail for wheat you want

34ford

Lynn,

Here's the ones I used on my coupe. They are raw stainless steel so if you want you can polish them. They come with the hose type clamp and the neophrene support bushings. The bushings come in red, blue and black. Scooter used them on Project 33 also.  Think there $25 a pair now.  http://www.stainless-specialties.com/

Bob

rumrumm

Thanks, Bob. That was what I was looking for. You da man!
Lynn
'32 3W

I write novels, too. https://lsjohanson.com

34ford

Quote from: "rumrumm"Thanks, Bob. That was what I was looking for. You da man!

Glad it was the one. It is the only one I know of. Pick mine up at the Nationals  in years past. They had a bunch of them laying on a table.

bob

PCFree

Quote from: "34ford"
Quote from: "rumrumm"Thanks, Bob. That was what I was looking for. You da man!

Glad it was the one. It is the only one I know of. Pick mine up at the Nationals  in years past. They had a bunch of them laying on a table.

bob
Not to sound critical or picky, but a hose clamp?  Looks tacky.  Borla has SS muffler clamps that look like muffler clamps.  They don't use them to seal the pipe but use them for their hangers.

rumrumm

I was planning to use that hanger with a ss muffler clamp that I can get from my local Dynomax dealer. They have ss clamps but not the hangers.
Lynn
'32 3W

I write novels, too. https://lsjohanson.com

PCFree

Quote from: "rumrumm"I was planning to use that hanger with a ss muffler clamp that I can get from my local Dynomax dealer. They have ss clamps but not the hangers.
Gotcha!