Paging...Mr. Dorsi....

[Jbird]

Bruce,
         If it's not too much trouble, could you get me the part number for the 67 Camaro disc brake mastercylinder, 7/8" bore. I'll try it and if it don't help I'll talk him into putting some high dollar discs all the way around.  Thanks     Jbird

[Bruce Dorsi]

If it's not too much trouble, could you get me the part number for the 67 Camaro disc brake mastercylinder, 7/8" bore.

..............
You ain't gonna' like this!

According to Wagner, the 7/8" bore m/c listed for the '67 Camaro w/ disc brake option, is NO LONGER AVAILABLE, either new or reman.  ....They do not show any Wagner part number for this m/c.
...Maybe, another brand still supports this application?

----------------------
Another 7/8" MANUAL Chevy m/c I see listed is for '78-'80 Malibu, '78-'80 El Camino, and '78-'80 Monte Carlo, as well as other GM clones.  ...This m/c carries Wagner # F101252 as Remanufactured.  ....Nothing is listed for NEW.

There are no pics or specs in these catalogs, so I don't know about the porting or mounting compatibilty.
.....Maybe someone else can advise.

---------------------
There is another 7/8" bore master listed for '64-'66 Nova, Chevelles, & Vettes, but I'm assuming it's a single reservoir for those years.

Sorry, I couldn't be of more help to you!  
.....I have a Wagner picture book on back-order since last November.  ...Maybe Frank has one!

[enjenjo]

the 78 to 80 master cylinder has the same mounting and line fittings as the early Camaro master cylinder. I think NAPA still carries the early Camaro master cylinder.

[Jbird]

Thanks you two. I got one for an 80 El Camino. I'll have to reroute the lines going into it, other than that it's a bolt in. I'll post the results.

  Jbird

[Jbird]

Well, the 7/8" mastercylinder helped quite a bit but I'm still not satisfied.
Maybe I can talk him into doing the four wheel disc thing.
Thanks again Bruce & Frank.
    Jbird