power booser is close to valve cover(I need a bell crank)

[48ford]

Hi guys,
i need to move the booster and master up on the firewall a little as I can't get the valve cover off the drivers side of the motor.
I remember seeing a bell crank on an old truck(or car)but it was years ago.
any idea who used them?I just think it was a ford pick up but i'm not sure anymore.
I can't use a smaller booster,and I don't want to start over and move the brake over.
Thanks Russ

[wayne petty]

mbm brakes

is one of the places to have stuff like that

http://www.mbmbrakeboosters.com/

pirate jack website has them in a friendly web page display..

http://www.piratejack.net/

here is the direct link to the booster brackets page

http://www.piratejack.net/index.php?option=com_virtuemart&page=shop.browse&category_id=22&Itemid=6


the late 60s ford pickups and into the early 70s also had a offset booster bracket as i recall...   so you might also want to look over at LMC truck..

[48ford]

thanks wayne,
Looks like the one for a 60-66 chevy truck is going to work.
Russ

[enjenjo]

You may have to relocate the pin location on the pedal to keep the ratio the same depending on the belcrank geometry.