press fitting clearance?

Started by butch27, March 22, 2010, 09:44:23 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

butch27

I'm making a open-driveshaft from a '40 closed drive and have all of the parts. Need to know--The connector is 1.463"  What should I bore out the yoke to for a press fit? It will be welded also.  Thanks

enjenjo

Welcome to hell. Here's your accordion.

brucer

general rule is .001 per inch..

butch27

Thanks  the chart is great.