Multi Pin Connector

Started by tonto1, March 13, 2009, 07:16:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

tonto1

March 13, 2009, 07:16:36 PM
I would like to make all of the electrical connections from my instrument panel to go thru one multi pin connector.
Does anyone have ideas of where to buy something like that.
To also have spares, it needs to have about 12-15 pins.
Why are there more horses a**es in the world than there are horses?

nzsimon

#1
March 13, 2009, 07:36:32 PM
Quote from: "tonto1"I would like to make all of the electrical connections from my instrument panel to go thru one multi pin connector.
Does anyone have ideas of where to buy something like that.
To also have spares, it needs to have about 12-15 pins.

something like this
http://www.jansen.co.nz/product.php?b=&sku=CMIL25MP
http://www.jansen.co.nz/product.php?b=&sku=CMIL25FV

or the reverse sex military spec connectors
Just because it\'s written down doesn\'t make it true

Charlie Chops 1940

#2
March 13, 2009, 07:58:22 PM
Painless Wiring ha multi-pin connectors. They are available thru Parr Automotive and others. Been using them for years for dash plugs. 3-6-9-12-15 I think.

Charlie
A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying. "Wow...that was fun!"

Poster geezer for retirement....

A Hooligan!

crdnblu

#3
March 13, 2009, 10:48:52 PM
Painless Info:
http://www.painlessperformance.com/assets/08Catalog/page58.pdf

part#'s 40006-40012 (2-15 wires)

tonto1

#4
March 14, 2009, 11:15:40 AM
Yes, the one from Painless looks like what I want.
The first one looks nice, but I'm to cheap to pay that much.

Thanks
Why are there more horses a**es in the world than there are horses?

phat rat

#5
March 14, 2009, 08:11:33 PM
I've got a couple of the Painless connectors on my cpe. No problem in 12 years
Some days it\'s not worth chewing through the restraints.

Bruce Dorsi

#6
March 15, 2009, 11:47:25 AM
Quote from: "tonto1"I would like to make all of the electrical connections from my instrument panel to go thru one multi pin connector.
Does anyone have ideas of where to buy something like that.
To also have spares, it needs to have about 12-15 pins.


I like the Molex .093" (pin diameter) connectors.  ......They are not sealed to prevent moisture from entering, but they are fine inside a car interior.  ......They will handle up to & including 14ga wires.

They are available at Radio Shack and electronic-supply houses.  ...Your choice of 3,6,9,12, or 15 pin configurations.  (Radio Shack only stocks up to 12 pin sizes.)

Radio Shack # 274-232 is 12-pin male connector w/terminals - $2.79

Radio Shack # 274-242 is 12-pin female connector w/terminals - $2.79

Radio Shack # 274-223 is a Terminal Extraction Tool - $7.99  (Not necessary, but much easier!)

Pictures are available at www.radioshack.com  .....Enter the item number into the search box.

The plastic parts can be attached to the ends of a harness, or they can snap into a retangular hole in a sheetmetal panel.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

If being smart means knowing what I am dumb at,  I must be a genius!
Print
Go Up Pages1
User actions