How bout a 4L60 ??

[chopped]

I picked up a 82 S10 for a frame swap. The trans should be a 4L60,same as 700R4 ? This came behind a 2.8 V6, would it bolt up and work behind a S.B.C. for an around town driver? Thanks, Skip

[tomslik]

not without an adapter....
if it was a 4.3 it'd work....

[chopped]

Well, it was a good dream while it lasted. Thanks

[enjenjo]

They do make an adapter, and it's fairly cheap.

[chopped]

Where else can I look. I see Speedway has one for the V6 to a 350 trans , dosen"t seem that would help.

[Crosley.In.AZ]

here is the deal.... the S-10 tranny behind a full size engine;

you have to use the small S-10 type converter, no option with small bell housing.  It requires a custom built converter so the stall speed is not sky high with the V-8.

Acquire the correct bell housing tranny...

[chopped]

That settles it for me, thanks.

[tomslik]

here is the deal.... the S-10 tranny behind a full size engine;

you have to use the small S-10 type converter, no option with small bell housing.  It requires a custom built converter so the stall speed is not sky high with the V-8.

Acquire the correct bell housing tranny...

didn't know about the converter biz-ness......

oh well, what's wrong with a really hi stall 'verter?