homemade brake and fuel line clips

Started by nzsimon, November 14, 2005, 12:51:37 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nzsimon

I must have way too much time on my hands

I started with a flat bit of stainless pressed it into a wiggly shape courtesy of the fatherin laws big press then cut drill polish and a shiny clip emerges I have three so far with a few more to go
Just because it\'s written down doesn\'t make it true

enjenjo

I've made them too, but only for my own stuff. Costs too much for customer cars. I've also made then from aluminum, using two pieces of plate, bolted together, and then drilled slightly undersize to hold the lines.
Welcome to hell. Here's your accordion.

Mr Cool

I have hundreds of these in stock, purchased them from Govt surplus auctions, apparently originally used on aircraft wiring looms as well as hydraulic lines etc.
Suitable for Brake lines


Suitable for Fuel lines


Also have a few larger sizes too.
Postage/freight cost may be prohibitive on these to the USA, however I'll look into it if anyone's interested.
Im nobody, right?
And dont forget, nobody\'s perfect.

av8