Gettin around at b'ville

[Crosley.In.AZ]

We took a pair of bicycles to ride around the salt.  These were simple collaspable bikes designed for regular mostly smooth surface.

As many now know the salt was fairly rough this year.

So  I looked around for something a bit better to ride. I found it.  As I was about to try the scooter out..... some person snapped a foto of me.      

[Leon]

I saw Don drive by a couple times but never could flag him down to say Hi.....

[Cword]

We took a pair of bicycles to ride around the salt.  These were simple collaspable bikes designed for regular mostly smooth surface.

As many now know the salt was fairly rough this year.

So  I looked around for something a bit better to ride. I found it.  As I was about to try the scooter out..... some person snapped a foto of me.      

Gee Tony, you should have unloaded it and took it for a spin.  I obviously wasn't using it.

I got the motor from a fellow down your way (Arizona)  Live Fast Motors is the name he uses Googling the name ought to lead you to him.

I really had a blast playing with that bike on the salt.  It was even comfortable to drive from the Start line to the pits.

Mike

[river1]

i took a spin on that very bike while in blanding. i plan on getting one of my own in the near future. it was a blast to ride. mike you need to post pics of those fenders, unless you already have done so elsewhere.

later jim

[GPster]

I got the motor from a fellow down your way (Arizona)  Live Fast Motors is the name he uses Googling the name ought to lead you to it

I'll have to add that to my list of things I shouldn't even think about. I'd been wanting to find  one of the JAWA front wheel friction drive set-ups that used to be available. My old Columbia 3 wheel bicycle has a differential so that both back wheels are both driven so maybe I'll look at his gear reduction unit to see if it would work for me. Then I can start thinking how to get it all on the plane as carry-on luggage. If I have 3 wheels does that mean that I need to be half again faster than Tony? GPster

[Crosley.In.AZ]

i took a spin on that very bike while in blanding. i plan on getting one of my own in the near future. it was a blast to ride. mike you need to post pics of those fenders, unless you already have done so elsewhere.

later jim

that little motor hauled yer butt around??

 

it was good to see you again jim ...... think management position.... (insiders joke)

[Crosley.In.AZ]

[

I got the motor from a fellow down your way (Arizona)  Live Fast Motors is the name he uses Googling the name ought to lead you to him.


Mike

I did some lookin.  The fellow is Sun Lakes AZ....  I remember when Sun Lakes was new.  that was in 1973.

[Cword]

The Fenders were made by Cody Davis in Bend Oregon, he sells them on ebay.
here's a link to an image of one fender and a couple more links to shots of the bike.
http://www.fsra.org/cdnrodder/IMG_0512.jpg
http://www.fsra.org/cdnrodder/IMG_0856.JPG
http://www.fsra.org/cdnrodder/IMG_0855.JPG

mike

[river1]

it was good to see you again jim ...... think management position.... (insiders joke)

hows this for a management position

frank feel free to delete if necessary

[GPster]

If I took a look at those fenders while riding I'd think the wheel was bent and fall over. GPster

[Crosley.In.AZ]

it was good to see you again jim ...... think management position.... (insiders joke)

hows this for a management position

frank feel free to delete if necessary

jim.... you need to get into a management position and make some changes is all.  Then everything will be better for all


 ...  ...

[sodbuster]

Here is KustomLincolnLady and someone else in the middle of Nebraska.

[WZ JUNK]

That is hotrod Liz in the lower photo.

[Bob K]

Here is KustomLincolnLady and someone else in the middle of Nebraska.

That is Liz's friend Barb and her friend Rob in the Tub. Not KustomLincolnLady

B B

[1FATGMC]

   

Looks like they ran into snow going across Wyoming and had to put their parkas on   .

c ya, Sum