Stock Gm exhaust manafold, altering!

[rooster]

Thanks for the help guys!

Bib, there is another version of manifold with the air stuff on it, or at least it looks like it.  Its found on 88-95 3/4 ton pickups w/o air manifold,350's!

I got a phone call in to a guy down the street that has a LT1 but he's not home yet.




Russ, I have one, it comes close to fitting! GM # 3989041

[zzebby]

Enjenjo' right about the welding.  I did one very similar, cut and angled the outlet on a rams horn,  back in the early eighties.  Ran it hard for 5-6 years and then switched to a big block.  Finally threw away the old cut manifold and it still was sound.  A buddy welded it with what he called nickel rod,  but same as what Enjenjo says.  Looked ok too.

Thanks for the help guys!

Bib, there is another version of manifold with the air stuff on it, or at least it looks like it.  Its found on 88-95 3/4 ton pickups w/o air manifold,350's!

I got a phone call in to a guy down the street that has a LT1 but he's not home yet.




Russ, I have one, it comes close to fitting! GM # 3989041