Where can I find split tubing??

[2rods]

Need some split tubing or rubber split hose to go over 1/8 sheet metal edge. Can be like 1/8 vacuum hose but split. Guess I could split with knife but would look better if already done. Thanks for any ideas.

[MrMopar64]

Need some split tubing or rubber split hose to go over 1/8 sheet metal edge. Can be like 1/8 vacuum hose but split. Guess I could split with knife but would look better if already done. Thanks for any ideas.

Can you use the split loom they use to cover wires........ I use it on edges that I have to pass wires or hoses over works good

Hope this helps

MM64  

[river1]

you might try the weatherstripping aisle of your local hardware store.

later jim

[purplepickup]

There is rubber edge trim made for that.  McMaster Carr has some and body shop supply shops have the chrome looking edging too.  

Here's a page of McMaster Carr

[2rods]

Thanks guys.

[river1]

damm i looked at McMaster Carr before i posted and didn't find it. good job george.

later jim