tailshaft tec Question

[barnsey]

hi guys i have struck a problem whilst fitting my tailshaft ,it use to fit perfect but in order for me to get the rear wheels to fit in the centre of the wheel arches i had to turn the rear leaf springs around which in turn has moved the diff forward i can still get the tailshaft in but have no movement in the slip joint ,so my question is once i have the tailshaft in position how much recomended movement should i have in the slip joint ? thanks guys any information would be a great help cheers Barnsey

[enjenjo]

I try for 1". That seems to work good.

[barnsey]

I try for 1". That seems to work good.

thanks for that i was thinking about 1" to 1 and a half" to be safe ill put it back in the lathe tomorowafter work and give it a go cheers barnsey