'57 Chev Rearend Question

Started by 39chevy, April 17, 2005, 10:11:52 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

enjenjo

#15
April 29, 2005, 04:39:05 PM
If you have it moving, spray some PB Blaster on it, and keep at it.
Welcome to hell. Here's your accordion.

Charlie Chops 1940

#16
April 29, 2005, 05:45:00 PM
Wait til you see how much axle bearings are....you may still change your mind to a 10 bolt.

Charlie
A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying. "Wow...that was fun!"

Poster geezer for retirement....

A Hooligan!

enjenjo

#17
April 29, 2005, 06:27:31 PM
Moser has the bearings at a much more reasonable price. A little heat on the outside of the bearing cup won't hurt anything, just don't get carried away.
Welcome to hell. Here's your accordion.

39chevy

#18
April 30, 2005, 01:22:03 PM
Eureka.  It finally came out.  I had to remove the third member nuts and loosen it then the axle finally gave way.  I also spayed PB Blaster in from the filler hole so that helped a lot.

So thanks to all that offered advice.

Don
Print
Go Up Pages 1 2
User actions