Gennie Shifters - FMX

[halfdone]

I have a Gennie shifter for a T400

I want to fit it too the FMX in my F1 pickup

Brackets are no problem, I can make them. (photo would help!)
Might even try floor mounting it, like the new Lokar

What I am not sure about is if the detent plate in the shifter is the same?

I know the same detent plate is used for T400 and T350, but is there a different one for FMX?

The Gennie Shifter web site I have found has NO content

I thought that before I get up in the middle of the night and ring them in the USA I would see if any of you guy's have any info?

Anyone got a Gennie catalogue or parts list? I remember seing a full list of spare parts that they publish, but I don't have a copy.

Mark

[enjenjo]

The FMX detent plate would be different than a 400 or 350 turbo, but would be the same as a C6.

[Pope Downunder]

I have a Gennie shifter for a T400

I want to fit it too the FMX in my F1 pickup

Brackets are no problem, I can make them. (photo would help!)
Might even try floor mounting it, like the new Lokar

What I am not sure about is if the detent plate in the shifter is the same?

I know the same detent plate is used for T400 and T350, but is there a different one for FMX?

The Gennie Shifter web site I have found has NO content

I thought that before I get up in the middle of the night and ring them in the USA I would see if any of you guy's have any info?

Anyone got a Gennie catalogue or parts list? I remember seing a full list of spare parts that they publish, but I don't have a copy.

Mark

A friend put a C4 one onto a TH350, and 'Gennie' was able to supply just the mounting bracket.  Maybe they could advise and send the detent plate etc. as well.

[halfdone]

There are two web sites out there for them, on with CA contact details and one with no address

Anyone know which is current?

I will try the email address on the non-CA one tonight (can't use work email for non-business stuff)

[btrc]

You might be aboe to get a kit from them to make the switch.  I converted my C6 Lokar shifter to an AOD setup with a kit from Lokar that just had the trans shift arm, mounting brackets, shift rod and a new insert for the shifter ball.

Bob