Sandblaster

[enjenjo]

Here are some pictures of what I did. It works really good except for the leaks. A bit of time will fix that though.

The first picture shows the water trap and regulator. It's regulated to 90 psi

The second picture is the lights I installed in the top. They have LED bulbs in them. I cut holes in the top of the cabinet, and installed plastic hemispheres I found on Amazon to protect the lights

I wired in a switched plug that controls the lights and the shop Vac to carry out the dust.

The shop Vac connection, that is also leaking dust. Inside is a baffle.

The plastic hemispheres to protect the lights.

The inside baffle to redirect the dust.

This is the doohickey I made to introduce air into the  media stream. The bolt screws into the standpipe and adjusts the amount of air allowed in.

[kb426]

I see it's on wheels. Good job.

[jaybee]

That looks good, and well thought out.