does anybody know who sells the thing

[tomslik]

you put in a drill to clean up threads?
i think i'm gonna want one as i need to trim off some of me 3" wheel studs...no idea what you call it, but i've seen them advertised

[123pugsy]

https://www.amazon.ca/Deburring-External-Chamfer-Stainless-Suitable/dp/B081CK9DZ1/ref=asc_df_B081CK9DZ1/?tag=googleshopc0c-20&linkCode=df0&hvadid=335174690133&hvpos=&hvnetw=g&hvrand=6200287549583789039&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9000783&hvtargid=pla-847164764293&psc=1

[tomslik]

you ever used one? just wondering if they are as good as it sounds..

[123pugsy]

Nope, but if it's made of HSS, I didn't check, I'm sure it would be fine.
But you just never know when buying something "as seen on TV"

[chimp koose]

If you use one make sure to turn it slow and use light pressure . And some cutting oil . It would be easy to crush the top of the thread down with too much pressure/dull tool .

[tomslik]

so, i bought one of these Titan 51950 EXO BURR External Deburrer and Chamfering Tool, For 5/16 to 7/8-Inch (8-22mm) Threads. works great.
i was cutting off some wheel studs/bolts that were on some aftermarket axles and wanted to clean up the ends..

[chimp koose]

Thanks for the feedback . One never knows how some of this stuff will work until you try it .