Threading bar stock

Started by jaybee, July 13, 2020, 10:05:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

jaybee

July 13, 2020, 10:05:29 PM
Can you thread a .704" bar, or is this too far between sizes?
Rudeness is the weak man's imitation of strength. Eric Hoffer  (1902 - 1983)

enjenjo

#1
July 13, 2020, 11:41:42 PM
It's roughly .029" too big for 11/16" and .046 too small for 3/4"  It is only .004" too small for an 18mm thread, so that should work.
Welcome to hell. Here's your accordion.

jaybee

#2
July 15, 2020, 06:21:10 AM
Quote from: "enjenjo"It's roughly .029" too big for 11/16" and .046 too small for 3/4"  It is only .004" too small for an 18mm thread, so that should work.

Thanks!
Rudeness is the weak man's imitation of strength. Eric Hoffer  (1902 - 1983)
Print
Go Up Pages1
User actions