Turn indicators

Started by butch27, May 31, 2011, 11:00:01 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

butch27

Rewiring the "T". I put in indicator lights and hooked up the BRIGHT wire to the dimmer. Now I have to connect the L&R turn indicator wires. I am running a '65 Corvair  column and connectors. Where do I plug in to the connectors for the indicator lights?

ragdol

I believe you can tap off the front turn signal wires. Your indicator lights will blink with them then. Larry

model a vette

Light blue wire is left signal and dark blue is the right signal if you still have the Corvair directional switch wires.
Ed

GPster

Quote from: "model a vette"Light blue wire is left signal and dark blue is the right signal if you still have the Corvair directional switch wires.
Doesn't take you long to appear when someone mentions Corvairs. What are you working on? GPster

model a vette

I've had a '66 Corvair for almost 20 years now. After some long delays I swapped in a reversed 4.3 V6 into the stock engine location. Still not on the road because of moves and new marriage!

In 1971 I built a rear engined Corvair using the '67 350 that is in my roadster now.

I did a lot of Corvair research while in Vietnam in 70-71.

I've kept up on Corvairs since and have lots of documentation.

Corvair guys are just as "different" as street rod guys!  :roll:
Ed

butch27

Thanks: Got the light blue and the dark blue spotted.!