so i found this chart...

Started by tomslik, January 24, 2009, 08:04:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

tomslik

January 24, 2009, 08:04:40 AM
The last thing I want to do is hurt you. But it\'s still on my list

wayne petty

#1
January 24, 2009, 12:02:02 PM
life is going to be better with that great info.,..

thanks    i had been searching for those tidbits for a while.. i used to go by the brake rotor guide to get bolt patterns.. and that took forever...


wayne...

Crosley.In.AZ

#2
January 24, 2009, 09:01:26 PM
great information there.
Tony

 Plutophobia (Fear of money)

chimp koose

#3
January 24, 2009, 11:35:11 PM
remember that 127mm is exactly 5" and 139.7 is 5.5" .That chart had me thinking my chev truck was metric?

C9

#4
January 27, 2009, 07:22:45 AM
Quote from: "chimp koose"remember that 127mm is exactly 5" and 139.7 is 5.5" .That chart had me thinking my chev truck was metric?


Depending on the year, it could be.

Co-worker gave me four steelies off his new at the time 88 Chevy half-ton after he installed mags.

The wheels on my tandem axle trailer were sad looking as well as having Chevy bolt pattern.

Removed a trailer wheel, slid one of the pickup wheels on and it fit fine.

Took the trailer tires & wheels to the shop, had the tires removed and installed on the pickup wheels.

The new pickup wheels w/tires were placed on the trailer, lugnuts started and when the first one was spun home you could see that the wheel wasn't going to fit cuz the pattern was off too far to let the lugnuts center like they should.

Many bad words were spoken that day.... :oops:
C9

Sailing the turquoise canyons of the Arizona desert.
Print
Go Up Pages1
User actions